PPS Software — provisionprocessingsystem.com ↗
203-792-2854support@scale.net
Progressive ScaleProgressive Scale
Request a quote →
Calibration procedures

How to calibrate a Fairbanks scale.

3 calibration procedures for Fairbanks indicators, balances, and scales, from our technicians' notes.

Reference only. Every digital scale has a different sequence of buttons to calibrate it, and most need a known calibration weight — typically calibrating at both zero (dead load) and span (the known-weight portion). Have a known weight ready before you start. These instructions are provided for reference only and Progressive Scale takes no responsibility for their use. If you need an on-site scale calibration in the CT, NY, or MA area, call 203-792-2854.
Bench Scale

Fairbanks Eclipse PPI-HR5000-X

remove back cover press black button on board twice to get to CC CAL Hit units when reads 0 add calibration weight. Hit units again. Adjust to correct calibration weight using zero/AT sw on side of unit then hit units again

Scale

Fairbanks HR-2300-2

Fairbanks HR-2300-2 Press Program press ^ till cal code is 113 then enter wait for scale I forgot from there

Scale

Fairbanks UPS

Fairbanks ups scale remove plate on left side press button press zero press units place displayed calibration weight on scale press cal button

Have us calibrate it → All brands →
Other manufacturers

More calibration procedures.

A&D5 proceduresAcculab3 proceduresAdam Equipment1 procedureCardinal1 procedureDenver Instrument1 procedureDetecto1 procedureDigi4 proceduresDoran4 proceduresFiling2 proceduresFlexweigh1 procedureGSC Scale1 procedureGSE4 proceduresMasstron1 procedureMettler Toledo3 proceduresNCI1 procedureOhaus1 procedurePennsylvania Scale5 proceduresRice Lake7 proceduresRinstrum2 proceduresSartorius1 procedureScientech1 procedureSetra1 procedureSterling1 procedureTranscell1 procedureVibra Screw1 procedure